The infinite loop has unleashed and it seems impossible to stop. Whatever the cause, be it improper shutdown, outdated driver, lack of maintenance and care, damaged system files, etc, this article will guide you through the steps to put it to end, and fix Windows 10 Automatic Reboot Loop with ease.
First Level: Identifying the Physical Causes of the Loop
Hygiene is the best habit of the civilized human being, and in the case of your computer, the best accessory and proactive preventive for unexpected and miserable events like this infinite loop. Just as correct hygiene keeps the bugs, going from the microscopic level to the horrible and opportunistic insects that appear on the skin in the absence of a good massage with water and soap, in the same way a correct maintenance of your computer will keep the electronic bugs neutralized, events such as the automatic restart whose harmful side effects, if not prevented or stopped, can cause serious damage to your system.
Over time your PC will accumulate dust inside it, unless you prevent that from happening. Otherwise, inevitably, the annoying automatic restart will appear. The mystery will be solved when you understand that the dust causes the electronic components to lose contact and not be recognized by the system, and the system not detecting them triggers the problem, and the automatic restart loop starts.
You will need to clean thoroughly every electronic piece, special attention to the RAM sticks to avoid the loop from happening. This is how to do it:
- Turn off your pc
- Unplug it from the wall outlet
- Press your PC’s power button to make sure that there are no power left
- Wear an anti-static band (you can also rub your hands on a metal surface to remove the statics on your hands which may seriously damage your PC components)
- Apply the cleaning kit: screw drivers, can of compressed air and cleaning cloth cannot be missed.
- Check your RAM sticks from dark residues, clean that with take a simple eraser and rub the RAM sticks.
This is the first thing to do, providing you know your PC has not received propper maintenance, so time to start dusting that computer!
Second Level: Software Maintenance not Carried out and Easy Solution
It is excellent that you take sophisticated proactive action when going online using a Trustworthy VPN, since you know for a fact that a number out of them are the best VPNs for windows, nonetheless, before going to even more sophisticated software issues, it is very advisable putting your eye, firstly, on the problem-signs of your OS lacking maintenance, blinking eyes before your sight.
The easiest of all solutions which works for the most cases consists on going to safe mode and running the system backup you were adviced to create when you bought your pc. This backup feature is very powerful in Windows 10, it is called ”Windows Recovery Drive” and fixes absolutely all the problems of a corrupted OS, taking your PC’s OS to the very first healthy and virginal state, that is, before the very first time you went browsing online.
When returning from your online journey, depending on how daring your behavior has been, you will get software issues like: corrupted system files, system broken drivers, damaged registry setting, wrong device partition or OS partition value, among other problems, the common cause for all of them being lack of software maintenance. Nontheless, the ”Windows Recivery Drive” tool must be your first try at attempting getting these malfunctions fixed.
A different yet very effective solution is repairing the Registry Editor. All you need to do is:
- Boot from the recovery drive
- Go to Advanced options
- Choose ”Command Prompt”
- Type Regedit and hit Enter
- In the Registry Editor dp the path: Computer/HKEY_LOCAL_MACHINE/SYSTEM/Setup/Status/ChildCompletion
- Find Setup.exe and double-click on the right panel you see.
- Change the field ”Value Data” to 3 and hit ”Ok”
- Close the Registry Editor and command Prompt.
- Finally, click ”OK” on the error message to restart the PC.
Third Level: Heavy Malfunctions and Simple Solutions
Here you have some common, persistent loop scenarios and their easy solutions.
- The easiest solution is to do a hard reboot. All you need to do is press and hold the power button on the computer for 3-5 seconds until the PC shuts down. Wait 10 seconds (most people never waits, which is wrong) and now start the computer you will see the roboot loop is gone, now check if the PC boots well.
- So you attempted to overclock? Well, the news is you actually messed up the BIOS, but don’t worry, you will just need to reset your BIOS. Remove the CMOS battery and wait 8-10 minutes, then put it back and power your PC to see it fixed.
- Overheating? GPU has reached its maximum temperature then triggering the loop. Just turn off you computer and let it cool down for 15 minutes. Use the MSI AFTERBURNER to monitor CPU & GPU temperature.
- System Panel Connectors: check these connectors as they may be loose.
- This problem happened right after an update? Then it originated due to Cumulative Update (KB3081424) not completing the update causing the corruption of Windows 10’s Registry. In this case you can:
- Go: Start > Settings > Update & Security > Windows Update >Check for Updates. An additional patch could fix the reboot issue.
- Take your Windows 10 CD and reboot the PC from the CD. Then:
- In the lower left corner hit ”Repair” option.
- Now choose: Troubleshoot.
- Click on Advanced Options>Command Prompt and enter these commands in the same order: ▪ Bootrec /fixmbr ▪ Bootrec /fixboot ▪ Bootrec /scanos ▪ Bootrec /rebuildbcd
Keep in contact for future maintenance and solution advice, remember keeping the balance between the physical and the virtual, the hardware and the software, the adequate maintenance level takes care of all parts, building is also preventing.