Top 3 Ways to Fix Media Test Failure Check Cable Error

Preboot execution environment commonly known as PXE is a boot program that helps your computer to load a bootable operating system from the network. Sometimes, due to various reasons, you might have seen the “media test failure check cable” error. If you have seen this kind of error and you want to get out of it, then you should read this entire post. So, without wasting any more time, let’s get into the main thing.Top 3 Ways to Fix Media Test Failure Check Cable Error

How to Solve the “Media Test Failure Check Cable” Error?

Most probably the error happens when there’s a problem with the BIOS, but sometimes it may be due to a disabled hard drive. There are a lot of methods which can be used to solve the “media test failure check cable” error. We are going to share only the most common ones as follows:

Also Read:- Fix Kmode Exception Not Handled Error in Windows 10

1. Update the Network Drivers

The best and simplest solution is to update your network drivers. You can update your network drivers by just downloading the latest driver from the manufacturer official website.Top 3 Ways to Fix Media Test Failure Check Cable Error

Sometimes, due to an interrupted network driver, the PXE may have some problems while accessing the internet. These little problems can restrict PXE to work properly. After updating the network drivers, restart your computer once to see the changes.

2. Change the Boot Order in BIOS

If the boot order is not according to the specifications of your device, then this may cause problems in the way of PXE. If you found the boot order wrong, then simply change the boot order in BIOS to boot from the hard drive instead of the network.Top 3 Ways to Fix Media Test Failure Check Cable Error

After that, the BIOS will try to find an operating system installed on the local hard drive instead of the network. Once you do this, then restart your computer so that the changes can be applied and seen.

Also Read:- Fix Memory Management Error in Windows 10

3. Clear CMOS to Resolve the Issue

Top 3 Ways to Fix Media Test Failure Check Cable ErrorYou can also clear the CMOS to get rid of the “media test failure check cable” error. The simplest method to clear the CMOS is to enter the BIOS setup utility and then Reset the BIOS settings. This will make some changes in the BIOS and the settings will be changed to default settings. Sometimes, there may be a little glitch in the BIOS settings which may be causing the issue. So, resetting the settings will clear out any glitches present in the BIOS and thus it helps in resolving the “media test failure check cable” error.

Conclusion

So, Above are the best methods which you can use to resolve the “media test failure check cable” error. I hope this guide will help you to get out of this problem. If you found this helpful, then share it with your friends, family, and relatives. Also, if you have any questions, then feel free to ask us in the comment section below.

Jitender Singh

Jitender Singh, the owner of this site, is a technical expert, SEO expert, YouTubber and a experienced blogger by profession. He basically belongs to a middle class family in Faridabad.

Leave a Comment